Using Dhcp - Detecting The Network Address Automatically - Ricoh 220-240 V Operating Instructions Manual

4. Configuration

Using DHCP - Detecting the Network Address Automatically

• When you use this printer in DHCP environment, select [DHCP] following this procedure.
• When [DHCP] is selected, you cannot make settings for the following items:
• IPv4 Address
• Subnet Mask
• Gateway Address
• Consult your network administrator for information about making network settings.
4
1. Press the [Menu] key.
The [Menu] screen appears.
2. Press the [ ] or [ ] key to display [Host Interface], and then press the [
3. Press the [ ] or [ ] key to display [Network Setup], and then press the [
4. Press the [ ] or [ ] key to display [IPv4 Settings], and then press the [
56
AUB051S
Enter] key.
Enter] key.
Enter] key.