JETWAY BA-500PRO User Manual page 51

Press [Ctrl+C] to building RAID. as the below figure:
Take Raid0 for example, use [↑] [↓] to shift the cursor, press space key to change the
choice, press [Ctrl-Y] to save.
Set Assignment mode as [Y], press [Ctrl-Y] to save, and then figure 5 appeared. It will
reminds you to press [Ctrl-Y] to input the LD name, as the below figure 6; press [Ctrl-Y]
to save and enter the below figure 7; afterwards it will reminds you to erase the MBR.
Choose [Ctrl-Y], figure 8 appeared. Press any key, finished the RAID.
[figure5]
46