JETWAY BA-500PRO User Manual page 35

CPU/HT Reference Clock
Use this item to set CPU/HT Reference Clock. The optional setting range is:190~600
MHz.
Processor Frequency Multiplier
The optional settings are: Auto and a setting range from x4.0 (800 MHz )to x35.0
(7000 MHz).
CPU-NB FID
The optional settings are: Auto; x4 ~x31.
Link Speed
The Hyper Transport link will run at this speed if it slower than or equal to system
clock and this board is capable。The optional setting range is:Auto; 200MHz to
2.6GHz
Link Width
The Hyper Transport link will run at this width. The optional setting range is:Auto; 4
Bit,8 Bit, 16Bit.
PCI E Reference Clock (MHz)
The optional setting range is:90~250 MHz.
SB Reference Clock (MHz)
The optional setting range is:90~150 MHz.
Spread Spectrum
The optional settings are: Disabled; SRC CLK; CPUHT CLK and All CLK.
Processor Voltage
The optional settings are: Auto; 0.8000V~1.3500V.
Warning: Setting some values too high may cause system to malfunction.
CPU Vcore 7-Shift
Use this item to set value in CPU Vcore 7-Shift function. The optional settings are:
Auto; 50mV to 350 mV.
Warning: Setting some values too high may cause system to malfunction.
Set Memory Voltage
30