Table of Contents
Advertisement
(8) FAN Power Headers: SYSFAN1 (3-pin), SYSFAN2 (3-pin), CPUFAN (4-pin)
These connectors support cooling fans of 350mA (4.2 Watts) or less, depending
on the fan manufacturer, the wire and plug may be different. The red wire should
be positive, while the black should be ground. Connect the fan's plug to the
board taking into consideration the polarity of connector.
(9) CD Audio-In Headers (4-pin): CDIN1
CDIN are the connectors for CD-Audio Input signal.
CD-ROM CD-Audio output connector.
(10) IR infrared module Headers (5-pin): IR1
This connector supports the optional wireless transmitting and receiving infrared
module. You must configure the setting through the BIOS setup to use the IR
function.
CPUFAN1
1
4
SYSFAN2
1
3
SYSFAN1
3
1
FAN Power Headers
CDIN
1
4
CD Audio-In Headers
IR1
6
2
5
Pin 1
IR infrared module Headers
17
Please connect it to
Advertisement
Table of Contents
