Memory Configuration - JETWAY BA-500PRO User Manual

Use this item to set memory voltage. The optional setting rang is from 1.50V to 2.25V.
Warning: Setting some values too high may cause system to malfunction.
CPU-NB Voltage 7-Shift
Use this item to set value in CPU Vcore 7-Shift function. The optional settings are:
Auto; 50mV to 350 mV.
Warning: Setting some values too high may cause system to malfunction.
NB-Core Voltage Setting
The optional settings are from 1.30v to 1.45v.
Warning: Setting some values too high may cause system to malfunction.
NB-PCIE Voltage Setting
The optional settings are from 1.15v to 1.30v.
Warning: Setting some values too high may cause system to malfunction.
too high may cause system to malfunction.
DRAM Command Rate
The optional settings are: Auto; 1T and 2T.
Memory Clock Mode
The optional settings are: Auto; Limit and Manual.
3-11-1

Memory Configuration

DRAM Timing Mode
The optional settings are: Auto; DCT0, DCT1 and Both.
Bank Interleaving
Use this item to enable bank memory interleaving.
Channel Interleaving
The optional settings: Disabled; Address bits 6; Address bits 12; XOR of Address bits
[20:16,6]; XOR of Address bits [20:16,9].
Enable Clock to ALL DIMMs
Enable unused clocks to DIMMS when memory slots are not populated.
Mem CLK Tristate during C3 /Alt VID.
Enable and disable Mem CLK Tri-stating during C3 and Alt VID
Memory Hole Remapping
31