Onboard Vga Configuration - JETWAY BA-500PRO User Manual

Primary Video Controller
This item is for user to choose primary video controller.

3-6-1 Onboard VGA Configuration

Internal Graphics Mode
The optional settings: Disabled; UMA; SIDEPORT; UMA+SIDEPORT.
UMA Frame Buffer Size
The optional settings: Auto; 32MB; 64MB,128MB,256MB, 512MB.
SIDEPORT Clock Speed
The optional settings are from 200MHz to 667MHz.
GFX Engine Clock Override
The optional settings are: Enable; Disabled.
GFX Engine Clock
Use this item to set GFX Engine clock in the range of 150 to 1000.
UMA-SP Interleave Mode
The optional settings are: Auto, Coarse and Fine.
SP Power Management
The optional settings are: Auto, Dynamic CKE, Dynamic CMD, Dynamic CLK and
Disabled.
SP NB Termination
The optional settings are: Auto; Enable; Disabled.
SP Memory Termination
The optional settings are: Auto; Enable; Disabled.
SP CMD Hold
The optional settings are: Auto; Enable; Disabled.
SP DATA Hold
The optional settings are: Auto; Enable; Disabled.
FB Location
The optional settings are: Above 4G, below 4G.
25