Program End - Removing The Laundry; End Of Program; Removing The Laundry - Miele TXI 680 WP Operating Instructions Manual

End of program

The program is finished when
Crease or End appears in the display.
The Start/Add laundry sensor light goes
out.

Removing the laundry

Only open the door when the drying
process has finished. Otherwise, the
laundry will not be properly dried
through and cooled down.
 Pull the door open at the side with
the orange marker.
 Remove the laundry.
Items left in the dryer could be
damaged by overdrying when the
dryer is used the next time.
Always remove all items from the
drum.
 Turn the program selector to the 
position.
 Remove the lint from the 2 lint filters
in the door opening: see "Cleaning
and care", "Cleaning lint filters".
 Shut the door gently.
6. Program end – removing the laundry
End/Anti-
 Empty the condensed water
container.
Useful tip: The condensed water can
be used for the SoftSteam program.
See "Condensed water container –
Preparing the condensed water
container for the SoftSteam program".
Drum lighting
The inside of the drum lights up so that
you don't forget any items of laundry
when you empty it.
The drum lighting will go out
automatically to save energy.
33