Miele TXI 680 WP Operating Instructions Manual page 89

Keypad tone
Each touch of a sensor button is
confirmed with an audible tone.
Options
- (factory setting)
Off
-        (quiet)
-        (loud)
If a selection is not allowed, a negative
signal tone sounds.
Buzzer volume
The buzzer sounds to let you know the
program has finished. The buzzer can
be set to be louder or quieter.
Options
-        (Quiet)
-        (factory setting)
-        (Loud)
Airway indicator
Lint should be removed after drying. In
addition, this indicator will remind you
to clean the filters when a certain
amount of lint has collected in them:

Clean plinth filter. See 
You can decide at what level of lint
this reminder should be given.
Options
You will have an idea of how often this
should be done after a few drying
programs.
- Off
This reminder does not appear.
However, if there is a very severe
blockage in the ducting, the program
will be cancelled and the fault
message

Clean plinth filter. See 
will appear in the display regardless
of this option.
- Heavy
The reminder only appears when
there is a heavy build-up of lint.
- Normal (factory setting)
- Light
The reminder appears when there is
only a small build-up of lint.
Settings
89