Replacing The Blocked Spray Jet For The Softsteam Program - Miele TXI 680 WP Operating Instructions Manual

Frequently Asked Questions
Replacing the blocked spray
jet for the SoftSteam program
Limescale deposits will impair the
spray jet.
In this case, the spray jet must be
removed and replaced with a new one
(see "Optional accessories").
You can only replace the spray jet
using a special tool. The special tool is
supplied with the new spray jet.

Using the wrong tool can cause
damage.
Doing so can damage the spray jet
or the tumble dryer.
Only use the tool supplied. Do not
use any other tool.
The SoftSteam program must never
be used without the spray jet fitted
and screwed in correctly.
66
 Open the door of the tumble dryer.
The spray jet is located in the top left of
the door opening.
 Attach the tool to the spray jet.
 Turn the tool counterclockwise to
unscrew the spray jet.
 Insert the new spray jet in the tool.
 Turn the tool clockwise to screw the
spray jet securely in position.