Drying; Understanding The Care-Label Symbols; Selecting The Correct Drying Level - Miele TXI 680 WP Operating Instructions Manual

Heat-pump dryer
Hide thumbs Also See for TXI 680 WP:
Table of Contents

Advertisement

Drying

Useful tip: See the "Program chart".
This describes the programs and gives
their maximum load.
- Always observe the maximum
recommended load for each program.
This will mean that the energy
consumption for the amount of
laundry is at its most economical.
- Down-filled garments have linings
which have a tendency to shrink,
depending on the quality of the item.
Only use the SoftSteam program for
these items.
- You should only tumble dry pure linen
if it is specified as suitable by the
manufacturer on the care label, as the
surface of the fabric may otherwise
become rough. Only use the
SoftSteam program for these items.
- Woolens and wool blends tend to
become matted and shrink if tumble
dried. Only use the Woolens
Handcare program for these items.
- Jersey fabrics (e.g. T-shirts,
underwear) tend to shrink when they
are washed for the first time.
Therefore, do not over-dry the fabrics
to prevent them from shrinking
further. Buy jersey fabrics that are
one or two sizes bigger.
- Select the Gentle extra option for
fabric which is particularly heat-
sensitive or susceptible to creasing.
1. Notes on correct laundry care
Understanding the care-label
symbols
Drying
Normal / higher temperature
Low temperature*
*Select Gentle
Do not tumble dry
Ironing
Very hot
Warm

Selecting the correct drying level

- Extra dry for hard-wearing and very
thick fabrics.
- Normal plus if you want to fold the
laundry after drying and put it in the
closet.
- Normal for textiles that can shrink. Or
for light cotton or jersey textiles.
- Slightly dry for particularly delicate
garments that you wish to line dry
afterwards.
- Hand iron/ or Machine iron if you
want to iron the laundry after drying.
Hot
Do not iron
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents