Miele TXI 680 WP Operating Instructions Manual page 31

 Set a time value of
 sensor buttons. Confirm with the
OK sensor button.
The selected delay start time has been
cancelled.
After the program has started, the
selected delay start time can only be
changed or cancelled by interrupting
the program.
Adding laundry during ongoing delay
start period
 Follow the description in "Changing
the program sequence – Adding or
removing laundry".
SmartStart
The SmartStart function lets you
define a time period during which your
dryer will start automatically. The start
takes place via a signal, e.g. from your
energy supplier, that indicates that the
electricity tariff is particularly
economical.
This function is active when the
SmartGrid setting is switched on.
The time period can be defined
between 15 minutes and 24 hours.
During this period, the dryer waits for
the signal from the energy supplier. If no
signal is sent during the defined period,
the dryer starts the drying program.
00:00 h with the
4. Selecting program settings
Setting the timeframe
If you have activated the
function in Settings,
instead of
Start in
display when you touch the  sensor
button (see "Settings – SmartGrid").
The procedure for setting this is the
same as for setting the time for delay
start.
 Use the  sensor buttons to enter
the hour and confirm your entry with
the OK sensor button.
The hour will be saved and the minute
numerical keypad will be highlighted.
 Use the  sensor buttons to enter
the minutes and confirm your entry
with the OK sensor button.
 Press the Start/Add laundry sensor
button to start the drying program
with SmartStart.
The following will appear in the display:
SmartStart
SmartGrid
SmartStart in
will appear in the


OK
31