Cleaning The Lint Filter In The Condensed Water Container - Miele TXI 680 WP Operating Instructions Manual

Cleaning the lint filter in the
condensed water container
In some circumstances, there can be
problems running the SoftSteam
program. The lint filter at the end of
the hose which is connected to the
rubber seal in the condensed water
container could be blocked.
 Remove the condensed water
container.
 Pull out the spout. Remove the spout
by holding the side lug and pulling
upwards.

To avoid detaching the hose, be
careful not to tug on it!
Frequently Asked Questions
 Guide the end of the hose through
the opening and hold it securely with
one hand.
 Use your other hand to pull the lint
filter off the hose.
 Rinse the lint filter with a jet of water
until all the lint has been removed.
 Refit the cleaned lint filter onto the
hose.
 Now feed the hose with its lint filter
attached into the condensed water
container.
 Refit the spout in the condensed
water container ensuring that it is
positioned correctly. Please refer to
the image.
65