Starting A Program; End Of Program - Removing The Laundry; End Of Program - Miele PDR 514 Operating And Installation Instructions

Drying
Cancelling/deleting
Delay Start
Delay Start count-
down
Starting a pro-
gram
Program runtime/
estimated time re-
maining
Energy saving

End of program

20
Delay Start continues to count down.
Turn the program selector to the  position. Alternatively, you can

also cancel Delay Start by opening the door.
- Delay Start times of more than  will count down in hours and
then in minutes until the start of the program.
- The drum will turn briefly every hour until the start of the program to
reduce laundry creasing.

4. Starting a program

Touch the flashing Start/Stop sensor button.

The Start/Stop sensor button will light up.
Program sequence
- If Delay Start has been selected, the Delay Start period will start to
count down first.
- With a longer Delay Start time, the drum will rotate occasionally to
untangle the laundry. This will loosen the laundry.
- The program starts.
The program runtime depends on the quantity of laundry, the type of
fabric, and the residual moisture in the laundry. The displayed pro-
gram duration for drying level programs can therefore vary or "jump".
The tumble dryer's electronic adapts during the ongoing drying pro-
gram. The displayed program runtime becomes more and more accu-
rate.
When using the programs for the first time, the displayed time
sometimes deviates significantly from the real time left. The differ-
ence between the estimated and achieved time becomes smaller if
the corresponding program is run more often. If different load sizes
are dried in one program, the time left display can only show an ap-
proximate time.
Laundry items and fabrics can wear out unnecessarily.
Avoid overdrying items of laundry and garments.
After a programmed time, the indicators dim. The Start/Stop sensor
button will flash slowly.
Touch the Start/Stop sensor button to switch on the indicators.

Energy saving for the indicators will not affect a running program.
- Before the program finishes, the laundry is cooled.
5. End of program – removing the laundry
The laundry will be cooled down shortly before the end of the pro-
gram. The laundry can now be unloaded.