Miele TXI 680 WP Operating Instructions Manual page 91

Display switch-off
To save energy, the display and
sensor buttons will go out after
10 minutes. The Start/Add laundry
button flashes slowly. You can alter
this setting.
Options
- (factory setting)
On
The display will go out (after
10 minutes):
– if a program is not selected after
the dryer has been switched on
– during the current program
– at the end of a program
-
On (not crnt prog)
The display will go out (as described
above) but will remain on while the
program is running.
- Off
The display will remain on (i.e. it will
never go out).
You can switch the display back on by
touching any sensor button.
Memory
The dryer saves the settings that were
selected last for a drying program
(drying stage and/or extra option, or
the duration for some programs).
When the program is chosen again, the
saved settings will appear in the
display.
Options
- (default setting)
Off
- On
The activation of the delay start, the
buzzer, or the EcoFeedback data are
not saved.
Anti-Crease
The duration of the Anti-crease phase
can be altered.
Options
- Off (factory setting)
-
1 h
- 2 h
Settings
91