Miele TXI 680 WP Operating Instructions Manual page 93

Remote control
The
Remote control
visible if the Miele@home
up and activated.
Once the Miele@mobile app has been
installed on your mobile device, you
can check the status of your tumble
dryer from anywhere and start it
remotely. You can also control it
remotely via the MobileStart function.
You can switch off the
setting if you do not want to operate the
dryer with your mobile device.
If Remote control is not switched on, the
app can cause the program to be
cancelled.
Use the "delay start" button to set a
time at which you wish to start the
tumble dryer and start the delay start
(see "Delay start / SmartStart").
The tumble dryer will then start within
the timeframe specified when it receives
your signal.
If it has not received a start signal from
the energy supplier by the latest start
time set, the tumble dryer will start
automatically.
Remote control is activated by default.
setting is only
setting is set
Remote control
SmartGrid
The
Remote control
visible if the Miele@home
up and activated.
This function can be used for starting
your tumble dryer automatically at a
time when your energy costs are most
economical.
Activating SmartGrid
button a new function. You set the
SmartGrid via the "delay start" button.
The tumble dryer will then start within
the timeframe specified when it receives
a signal from the energy supplier. If it
has not received a signal from the
energy supplier by the latest start time
set, the tumble dryer will start
automatically (see "Delay start"). Please
check with your local utility provider for
availability.
The SmartGrid function is switched off
in the factory setting.
Settings
setting is only
setting is set
gives the delay start
93