Fluke CableAnalyzer DSP-4000 Series User Manual page 37

Item Feature
O
AC power indicator
P
AC adapter/ charger jack
Q
Eject button (DSP-4100)
R
Memory card slot (DSP-4100)
Table 2-4. Main Unit Features (cont.)
LED off,
unit turned off
LED off,
unit turned on
LED flashing red
LED steady red
LED steady
green
Connection for the ac adapter/charger supplied with
the test tool.
Button for ejecting the memory card.
Slot for the memory card used for saving Autotest
results on a DSP-4100.
Getting Started
Main Unit Features
Description
Battery is not charging.
The charger is not plugged in.
Battery is not charging.
The charger is not plugged in
or the test tool is running a
test. When the test is
finished, charging resumes
unless the battery is already
charged (>80%).
Fast charge pending.
Charging is beginning. This
state may last for several
minutes until fast charging
begins.
Fast charge.
The unit stays in fast charge
mode for up to 4 hours, or
until either the battery is fully
charged or a test is initiated.
Charge complete.
Fast charge is complete. The
unit enters trickle charge
mode.
2
2-19