DSP-4000 Series
Users Manual
Quick Configuration
The settings listed in Table 2-3 affect either the display format or the accuracy of
your test results. Following the table are instructions for changing the settings. For
a complete list of the test tool's adjustable settings, refer to the later section
"Setup."
SETUP Setting
Test Standard
and Cable Type
Report
Identification
Store Plot Data
(DSP-4100)
Length Units
Numeric Format
Display and
Report
Language
Power Line
Noise Filter
Frequency
2-8
Table 2-3. Quick Configuration Settings
Select the test standard and cable type you are using. Fiber optic cable
testing requires a Fluke Networks DSP-FTA410 Fiber Test Adapter or a
Fluke Networks DSP-FOM (Fiber Optic Meter; comes with the DSP-FTK).
Enter your company's name, operators' names, and site names. These
names appear in the Autotest reports you save.
Enable this setting to store plot data (from tests such as attenuation, return
loss, and NEXT) with Autotest results saved on a DSP-4100.
Select meters or feet as the unit for length measurements.
Select a format (0.00 or 0,00) for display of decimal fractions.
Select English, German, French, Spanish, Italian, Portuguese, or
Japanese. Korean and Simplified Chinese are available for some display
messages and for reports printed with CableManager software.
Select the frequency of the ac power in your area. The test tool filters out
50 Hz or 60 Hz noise from measurements.
Description