Fluke CableAnalyzer DSP-4000 Series User Manual page 207

Editing a Test Tool's SETUP Settings
You can use CableManager to save some of the test tool's SETUP settings on a
PC, edit the settings on the PC, and download the settings to the test tool. This
feature is useful for setting up multiple test tools or entering multiple site or
operator names into a test tool.
When you upgrade the test tool's software, CableManager lets you
save the test tool's SETUP settings as part of the upgrade procedure.
Uploading SETUP Settings from the Test Tool
1. On the main CableManager toolbar, click
2. In the
Setup
from the test tool.
Editing, Saving, and Downloading SETUP Settings
1. If a setup file is already open, go to step 4.
2. On the main CableManager toolbar, click
3. To edit an existing setup file, click
(.set extension); then click
To create a new setup file, click
4. To edit a setup item, click on the + box; then double-click on the selection
below the item, or choose
5. Enter a new selection in the
6. To save the settings on the PC, click
name for the setup file; then click
To download the settings to the test tool, click
Getting Started with CableManager Software
Note
window click
From DSP
.
Open
Properties
Setup Item
Save
Editing a Test Tool's SETUP Settings
( DSP Setup
. The editable settings are uploaded
( DSP Setup
( Open ). Select the desired setup file
(New).
from the menu.
Items
dialog box; then click
( ). Choose a directory and file
Save
.
.
To DSP
).
).
.
OK
B-17
B