Fluke CableAnalyzer DSP-4000 Series User Manual page 171

Test Standards
Refer to the test standards document included on the CableManager
CD for more details on test standards.
Test Standard
TIA Category 3 and 5E per Addendum #5
to TIA/EIA-568A
TIA Category 5 (new) per TIA TSB-95
TIA Category 6 per TIA Addendum #1
to TIA/EIA-568B (draft)
ISO/IEC-11801-2000 Class C and D (new)
ISO/IEC-11801-2000+ Class E (draft)
STP cabling, (IBM Type 1, 150 Ω)
ANSI TP-PMD
IEEE 802.3 10BASE5, 10BASE2
IEEE 802.3 10BASE-T, 100BASE-TX, 1000BASE-T
IEEE 802.5
Additional test standards are available. For information on additional test
standards, testing to higher cabling performance standards or different cabling
types (including fiber optic cabling) contact Fluke Networks.
Fiber optic test standards are supported when using the optional Fiber Test
Adapters. See those products' manuals for more information.
Time for Autotest
Full 2-way Autotest of Category 5 UTP cable in approximately 10 seconds.
Maintenance and Specifications
Note
basic link or channel
basic link or channel
permanent link or channel
permanent link or channel
permanent link or channel
Ethernet with coaxial cabling
Ethernet with twisted pair cabling
Token Ring, 4 Mb/s or 16 Mb/s
Specifications
Link Type
8
8-11