Editing; Dubbing A Tape - Sony DCR-TRV140E Operating Instructions Manual

— Editing —

Dubbing a tape

Using the A/V connecting cable
Connect your camcorder to the VCR using the
A/V connecting cable supplied with your
camcorder.
You can record and edit a picture with the
connected VCR by using your camcorder as a
player.
Set DISPLAY to LCD in
(The default setting is set to LCD).
If you do not make the indicators disappear, they
are recorded on tapes.
Make the indicators disappear by pressing the
following buttons:
– DISPLAY on your camcorder
– DISPLAY on the Remote Commander
– DATA CODE/SEARCH MODE on the Remote
Commander
(1)Insert a blank tape (or a tape you want to
record over) into the VCR, and insert the
recorded tape into your camcorder.
(2)Set the input selector on the VCR to LINE.
Refer to the operating instructions of your
VCR for more information.
(3)Set the POWER switch to VCR.
(4) Play back the recorded tape on your
camcorder.
(5)Start recording on the VCR.
Refer to the operating instructions of your
VCR for more information.
A/V connecting cable (supplied)/
: Signal flow/
in the menu settings
S VIDEO OUT
A / V OUT
(1)
(2)
(3)
(4)
(5)
Yellow/
White/
IN
S VIDEO
VIDEO
AUDIO
Red/
87