Sony DCR-TRV140E Operating Instructions Manual page 113

Viewing images using your computer
– USB Streaming (Windows users only)
If you cannot install the USB driver
The USB driver has been registered incorrectly as
your computer was connected to your camcorder
before installing the USB driver. Perform the
following procedure to correctly install the USB
driver.
Step 1 Uninstall the incorrect USB driver
1 Turn on your computer and allow Windows
to load.
2 Connect the USB jack on your camcorder to
the USB connector on your computer using
the supplied USB cable.
To the USB connector/
Computer/
3 Connect the AC power adaptor, and set the
POWER switch to CAMERA or VCR.
4 Open your computer's "Device Manager."
Windows XP:
Select "Start" t "Control Panel" t "System"
t "Hardware" tab, and click the "Device
Manager" button.
If "System" is not in the control panel, the
"Pick a Category" screen appears. In this case,
click "Switch to Classic View" instead.
Windows 2000 Professional:
Select "My Computer" t "Control Panel" t
"System" t "Hardware" tab, and click the
"Device Manager" button.
Windows 98 SE/Windows Me:
Select "My Computer" t "Control Panel" t
"System," and click the "Device Manager"
tab.
1
2
USB cable (supplied)/
3
4
To the (USB) jack/
t
t t
t
t
t
t
t
113