Searching for a photo
– Photo search/
Photo scan
You can search for the still image recorded on
tape (photo search).
You can also search for still images one after
another and display each image for 5 seconds
automatically (photo scan). Use the Remote
Commander for these operations.
Searching for a photo
(1) Set the POWER switch to VCR.
(2) Press SEARCH MODE on the Remote
Commander repeatedly, until the photo
search indicator appears.
The indicator changes as follows:
t DATE SEARCH t PHOTO SEARCH
no indicator T PHOTO SCAN T
(3) Press . or > to select the photo for
playback. Each time you press . or >,
the camcorder searches for the previous or
next photo. Your camcorder automatically
starts playback from the photo.
2
SEARCH
MODE
3
To stop searching
Press x.
(1)
(2)
(3)
PHOTO
00
SEARCH
PHOTO
01
SEARCH
DATE SEARCH t PHOTO SEARCH
no indicator T PHOTO SCAN
.
.
x
>
>
85