Sony DCR-TRV140E Operating Instructions Manual page 125

Changing the menu settings
Icon/item Mode
WORLD TIME
–––––
BEEP z MELODY
COMMANDER z ON
DISPLAY z LCD
REC LAMP
z ON
VIDEO EDIT
In more than 5 minutes after removing the power source
The AUDIO MIX, COMMANDER and HiFi SOUND items are returned to their default settings.
The other menu items are held in memory even when the battery is removed.
Recording a close-up picture
When REC LAMP is set to ON, the red camera recording lamp on the front of the camcorder may
reflect on the subject if it is close. In this case, we recommend you setting REC LAMP to OFF.
Meaning
To set the clock to the local time.
Turn the SEL/PUSH EXEC dial to set the time
difference. The clock changes by the time difference
you have set. If you set the time difference to 0, the
clock returns to the originally set time.
To output the melody when you start/stop recording
or when an unusual condition occurs on your
camcorder.
NORMAL To output the beep instead of the melody.
OFF To cancel the melody and beep sound.
To activate the Remote Commander supplied with
your camcorder.
OFF To deactivate the Remote Commander to avoid
unintentional operations caused by other VCR's
remote controllers.
To show the display on the LCD screen and in the
viewfinder.
V-OUT/LCD To show the display on the TV screen, LCD screen
and in the viewfinder.
To light up the camera recording lamp at the front of
your camcorder when recording.
OFF To turn the camera recording lamp off so that the
subject is not aware of the recording.
—— To make programmes and perform video editing.
(p. 91)
POWER
switch
CAMERA
VCR
CAMERA
VCR
CAMERA
VCR
CAMERA
CAMERA
VCR
125