Sony DCR-TRV140E Operating Instructions Manual page 107

Inserting a scene from a VCR
– Insert Editing
(1) Set the POWER switch to VCR.
(2) On the VCR, locate just before the insert start
point [a], then press X to set the VCR to the
playback pause mode.
(3) On your camcorder, locate the insert end
point [c] by pressing m or M. Then press
X to set it to the playback pause mode.
(4) Press ZERO SET MEMORY on the Remote
Commander. The ZERO SET MEMORY
indicator flashes and the end point of the
insert is stored in memory.
(5) On your camcorder, locate the insert start
point [b] by pressing m, then press
z REC and the button on its right
simultaneously to set your camcorder to the
recording pause mode.
(6) First press X on the VCR, and after a few
seconds press X on your camcorder to start
inserting the new scene.
Inserting automatically stops near the zero
point on the counter. Your camcorder
automatically stops. The end point [c] of the
insert stored in memory is cancelled.
4
ZERO SET
MEMORY
(1)
(2)
(3)
(4)
(5)
(6)
X
0:00:00
ZERO SET
MEMORY
X
[c]
m M
X
[b]
z
X
[c]
5
REC
[a]
m
107