Sony DCR-TRV140E Operating Instructions Manual page 39

Playing back a tape
Using the data code function
Your camcorder automatically records not only
images on the tape but also the recording data
(date/time or various settings when recorded)
(Data code).
Press DATA CODE on the Remote Commander
in the playback mode.
The display changes as follows:
date/time t various settings (SteadyShot,
exposure AUTO/MANUAL, white balance, gain,
shutter speed, aperture value) t no indicator
[a]: SteadyShot OFF indicator
[b]: Exposure mode indicator
[c]: White balance indicator
[d]: Gain indicator
[e]: Shutter speed indicator
[f]: Aperture value
To not display the recording date
Set DATA CODE to DATE in the menu settings
(p. 123).
The display changes as follows:
date/time t no indicator
Date/time/
40
0:00:23:01
min
4 7 2002
12:05:56
t
t
Various settings/
40
0:00:23:01
min
AUTO
50 AWB
F1.4 9dB
[a]:
[b]:
[c]:
[d]:
[e]:
[f]:
t
[a]
[b]
[c]
[d]
[e]
[f]
39