Sony DCR-TRV140E Operating Instructions Manual page 102

Dubbing only desired scenes
– Digital program editing
Erasing the programme you have set
Erase OUT first and then IN from the last set
programme.
(1) Turn the SEL/PUSH EXEC dial to select
UNDO, then press the dial.
The last set programme mark flashes.
(2) Turn the SEL/PUSH EXEC dial to select
EXECUTE, then press the dial.
The programme mark is cleared and the
setting is cancelled.
To cancel erasing
Select RETURN in step 2.
Erasing all programmes
(1) Select VIDEO EDIT in the menu settings.
(2) Turn the SEL/PUSH EXEC dial to select
ERASE ALL, then press the dial.
All the programme marks flash.
(3) Turn the SEL/PUSH EXEC dial to select
EXECUTE, then press the dial.
The programme marks are cleared and the
settings are cancelled.
To cancel erasing all programmes
Select RETURN in step 3.
To cancel a programme you have set
Press MENU.
The programme is stored in memory until the
tape is ejected.
Note
You cannot operate recording during Digital
program editing.
On a blank portion of the tape
You cannot set IN or OUT on a blank portion of
the tape.
If there is a blank portion between IN and
OUT on the tape
The total time code may not be displayed
correctly.
102
(1)
(2)
(1)
(2)
(3)