Parksense Active Park Assist System - If Equipped; Lanesense - If Equipped; Lanesense Operation - Jeep CHEROKEE User Manual

PARKSENSE ACTIVE PARK
ASSIST SYSTEM — IF
EQUIPPED
The ParkSense Active Park Assist system is
intended to assist the driver during parallel
and perpendicular parking maneuvers by
identifying a proper parking space, providing
audible/visual instructions, and controlling
the steering wheel. The ParkSense Active
Park Assist system is defined as "semi-auto-
matic" since the driver maintains control of
the accelerator, gear selector and brakes.
Depending on the driver's parking maneuver
selection, the ParkSense Active Park Assist
system is capable of maneuvering a vehicle
into a parallel or a perpendicular parking
space on either side (i.e., driver side or
passenger side).
NOTE:
The driver is always responsible for

controlling the vehicle, responsible for any
surrounding objects, and must intervene
as required.
The system is provided to assist the driver

and not to substitute the driver.
168
During a semi-automatic maneuver, if the

driver touches the steering wheel after
being instructed to remove their hands
from the steering wheel, the system will
cancel, and the driver will be required to
manually complete the parking maneuver.
The system may not work in all conditions

(e.g. environmental conditions such as
heavy rain, snow, etc., or if searching for a
parking space that has surfaces that will
absorb the ultrasonic sensor waves).
New vehicles from the dealer must have at

least 30 miles (48 km)
before the ParkSense Active Park Assist
system is fully calibrated and performs
accurately. This is due to the system's
dynamic vehicle calibration to improve the
performance of the feature. The system
will also continuously
dynamic vehicle calibration to account for
differences such as over or under inflated
tires and new tires.
The ParkSense Active Park Assist system can
be enabled and disabled with the ParkSense
Active Park Assist switch, located on the
switch panel below the Uconnect display.
To enable the ParkSense Active
Park Assist system, push the Park-
Sense Active Park Assist switch
once (LED turns on).
To disable the ParkSense Active Park Assist
system, push the ParkSense Active Park
Assist switch again (LED turns off).
Refer to the Owner's Manual for further infor-
mation.
LANESENSE — IF EQUIPPED

LaneSense Operation

accumulated
The LaneSense system is operational at
speeds above 37 mph (60 km/h) and below
112 mph
system uses a forward looking camera to
detect lane markings and measure vehicle
perform the
position within the lane boundaries.
When both lane markings are detected and the
driver unintentionally drifts out of the lane (no
turn signal applied), the LaneSense system
provides a haptic warning in the form of torque
applied to the steering wheel, as well as a
visual warning in the instrument cluster
display, to prompt the driver to remain within
the lane boundaries. The LaneSense system
(180 km/h). The LaneSense