Answering System Settings; Answer On/Off - AT&T CL82200 User Manual

Handset settings

Answering system settings

Use the answering system menu to turn on or off the answering system, setup
the announcement message, or change the number of rings, remote access
code, and message alert tone.
1. When the handset is in idle mode, press MENU/
enter the main menu.
2. Press CID or
/SELECT.
MENU

Answer on/off

Unless you change it, the answering system is on and ready to record
messages. You can turn the answering system off, but if you do so, the
answering system does not answer calls and record incoming messages.
To turn the answering system on or off from a handset:
1. When the handset is in idle mode, press MENU/
enter the main menu.
2. Press CID or
/SELECT.
MENU
3. Press CID or
press /SELECT.
MENU
4. Press CID or
press /SELECT to confirm the setting and you hear a
MENU
confirmation tone. Press
If the answering system is on, the handset screen shows the
ANS ON icon.
NOTE: If the answering system is off and there is an incoming call, the
system answers after 10 rings and announces, "Please enter your remote access code." For
more information about remote access codes, see page 47.
DIR to scroll to >Answering sys, then press
DIR to scroll to >Answering sys, then press
DIR to scroll to >Answer ON/OFF, then
DIR to select between On and Off, then
OFF/
CLEAR
SELECT
SELECT
to cancel the procedure.
16
Play messages
to
Answering sys
>
Play messages
to
Answering sys
>
Answer ON/OFF
>
Ans sys setup
ANSWER ON/OFF
>On