Set Date/Time - AT&T CL82200 User Manual

Handset settings
Telephone settings
The answering system announces the day and time of the message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. The year must be set so that the day of
the week can be calculated from the caller ID information. You can turn off the
date and time settings of the caller ID service and use your own settings for
each incoming call (see CID time synchonize section on the following page).
After a power failure or the first handset registration, the system reminds you
to set the date and time for backup before entering the idle mode.

Set date/time

Follow the steps below to set the month, day, year and time.
1. When the handset is in idle mode, press MENU/
enter the main menu.
2. Press CID or
/SELECT.
MENU
3. Press CID or
/SELECT.
MENU
4. Press CID or
number using the dial pad, then press
5. Press CID or
number using the dial pad, then press
6. Press CID or
number using the dial pad, then press
7. Press CID or
number using the dial pad, then press
8. Press CID or
number using the dial pad, then press
9. Press CID or
/SELECT to confirm. There is a confirmation tone.
MENU
Press OFF/
NOTE: If the clock is not set when a message is recorded, the system announces, "Time and day
not set." before it plays the message.
DIR to scroll to >Settings, then press
DIR to scroll to >Date & time, then press
DIR to select the month, or enter the correct
DIR to select the day, or enter the correct
DIR to select the year, or enter the correct
DIR to select the hour, or enter the correct
DIR to select the minute, or enter the correct
DIR to select the AM or PM, then press
to cancel the procedure.
CLEAR
SELECT
/SELECT to confirm.
MENU
/SELECT to confirm.
MENU
/SELECT to confirm.
MENU
/SELECT to confirm.
MENU
/SELECT to confirm.
MENU
12
to
>
Settings
User help
Date & time
>
CID time sync
SET DATE
--/--/--
SET TIME
--:-- --