Advertisement
FEATURE SETUP
Set Time
You can choose to set the time manually, or you can allow
it to be set automatically with incoming Caller ID information.
MENU
1
Press
on the handset.
2
Press
until the screen displays
OK
3
Press
. The screen displays the current time setting. Use
to move the cursor, use the keypad to change a digit.
Press
to select AM or PM .
AM/PM
SAVE
4
Press
to save the displayed time.
NOTE: To set up the answering system clock, please refer to
ANSWERING SYSTEM OPERATION section on this page or
see "Set the Clock" in ANSWERING SYSTEM OPERATION on
page 50 of your User's Manual.
Clock Mode
You can choose to display the time when the phone is idle at the
handset, or you can turn this feature off.The default setting is ON.
MENU
1
Press
on the handset or base.
2
Press
until the screen highlights
OK
3
Press
. The screen displays
OFF
ON
4
Press
or
OK
5
Press
to save the displayed setting.
Sound Select
This telephone uses the latest acoustic receiver design, providing you
with four different sound quality settings.
During a call, you can adjust the quality of the sound. Pressing
repeatedly will cycle you through four different
responses.
NOTE: The mid-boost setting is hearing-aid compatible.
BASS – Low frequency sounds enhanced.
(continued)
INTERCOM
VOICE ANNOUNCE
HANDSET SETTINGS
SET TIME
OK
VOICE ANNOUNCE
HANDSET SETTINGS
SET TIME
CLOCK MODE
OK
CLOCK ENABLE
ON
OFF
OK
.
Sound Select
MID – Mid-range sounds enhanced.
TREBLE – High frequency sounds enhanced.
NATURAL – No frequency enhancement.
NOTE: This feature is available only on the handset
earpiece, not on the speakerphone or optional headset.
ANSWERING SYSTEM
Turn Answering System On/Off
Press
to turn the system on or off. When the system is
is turned on, you will hear "Machine on" and the ON/OFF light
will be lit.
When you turn the system on for the first time, it will use the default
setting and pre-recorded outgoing announcements. For details on
recording your own outgoing announcements and changing system
settings, see "ANSWERING SYSTEM OPERATION" starting on page
50 of your User's Manual.
Set the Clock
ON
1 Make sure the answering system is on.
2 Press
announces " To change clock, press
3 Press
4 Press c until the system announces the correct day, then
press
5 Press c until the system announces the correct hour,
then press
6 Press c until the system announces the correct minutes,
then press
setting.
Note:You can press and hold c to advance the
minutes settings by tens.
© 2003 Advanced American Telephones. All Rights Reserved.
AT&T and the Globe Design are trademarks of AT&T Corp.,
(continued)
. The system announces the clock setting, then
.
.
.
. The system announces the current clock
licensed to Advanced American Telephone.
"
Advertisement
