Create Directory Entries; To Create A New Directory Entry - AT&T CL82200 User Manual

Directory

Create directory entries

To create a new directory entry

1. Press MENU/
2. Press CID or
/SELECT.
MENU
3. Press CID or
4. Press /SELECT.
MENU
5. Enter the telephone number when prompted.
• Use the dial pad to enter up to 30 digits.
– Press
the left or right.
– Press
– Press and hold
– Press and hold
dialing pause (a p appears).
-OR-
Copy a number from the redial list by pressing REDIAL/
CID or
number to copy. Press
6. Press /SELECT to save the number in the display.
MENU
The display shows Already saved if the number is already in the directory. You
cannot save the same number twice.
7. Enter the name when prompted.
• Use the dial pad to enter a name (up to 15 characters).
Each time you press a key, the character on that key
appears. Additional key presses produce other
characters on that key. See the chart on the next page.
– Press
or right.
– Press
MUTE
– Press and hold
NOTE: The first letter of every word is a capital letter. The remaining letters in a word start
as lower case letters as in the chart on the next page.
in idle mode to enter the main menu.
SELECT
DIR to scroll to >Directory, then press
DIR to highlight Add contact.
CID or DIR to move the cursor to
/DELETE to erase digits.
MUTE
/DELETE to erase all digits.
MUTE
REDIAL
DIR, or pressing REDIAL/
CID or DIR to move the cursor to the left
/DELETE to erase letters.
/DELETE to erase all letters.
MUTE
/PAUSE to enter a three-second
/SELECT to copy the number.
MENU
30
repeatedly to locate the
PAUSE
Answering sys
Directory
>
REVIEW
>Add contact
ENTER NUMBER
888-883-2445_
then
PAUSE
ENTER NAME
Robert Brown_
Saved