Self-Timer - Canon PowerShot A510 User Manual

Canon user's guide digital camera powershot a520,powershot a510
Hide thumbs Also See for PowerShot A510:
Table of Contents

Advertisement

The lower indicator will light yellow when the
shutter button is pressed halfway.
Shooting procedures are the same as for the
Mode (p. 33).
Always use the LCD monitor to compose
images in macro mode. Shooting with the
viewfinder is possible, however, part of the
image may not appear in the actual shot
(p. 35).
When the lens is zoomed out to the wide
angle end*
1
, the recordable area is approx.
60 x 44 mm (2.4 x 1.7 in.), and at telephoto
end*
2
, it is approx. 84 x 63 mm (3.3 x
2.5 in.).
When the zoom position is located between
the telephoto end and the wide angle end,
the distance between the front of the lens
and the subject will be the same as the
telephoto end.
The exposure may not be optimal when the
flash is used in macro mode.
1
*
Closest focal distance.
*
2
Maximum optical telephoto setting.

Self-timer

Mode Dial
* The
cannot be set in
1
Press the FUNC.
button and select
*(Drive Mode)
using the
or
button.
* The current setting is
displayed.
2
Select
,
or
button and press the FUNC.
button.
When
is selected, the shutter release will
be delayed for 10 seconds, and when
selected, the shutter release will be delayed for
2 seconds, after you press the shutter button
all the way.
Shooting – The Basics
and
modes.
using the
or
is
45

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powershot a520A510 - powershot 3.2mp digital camera

Table of Contents