Various Functions
Macintosh
OS
Mac OS X (v10.1.5 – v10.3)
Computer
The above OS should be pre-installed on
Model
computers with built-in USB ports.
CPU
PowerPC G3/G4/G5
RAM
256 MB or more
Interface
USB
Canon Utilities
Free Hard
ImageBrowser: 200 MB or more
Disk Space
PhotoStitch: 40 MB or more
ArcSoft PhotoStudio: 50 MB or more
Display
1,024 x 768 pixels/32,000 Colors or better
IMPORTANT
You must install the software and driver bundled
on the supplied Canon Digital Camera Solution
Disk onto your computer before connecting the
camera to a computer.
The camera will not operate correctly if you
connect it to your computer before installing
the driver and software. If this happens,
please refer to the Troubleshooting section of
the Software Starter Guide.
108
You do not need to turn off the camera or
computer power when making a USB
connection.
Please refer to your computer's manual for
information regarding the location of the
USB port.
You are recommended to use new AA size
batteries, fully charged AA size NiMH
batteries (sold separately) or AC Adapter
Kit ACK800 (sold separately) to power the
camera when connecting to a computer
(p. 129, 131).
All procedures performed with a connection
to a USB 2.0 compliant board are not
guaranteed.