Shooting – The Basics
To shoot landscapes, swivel (pan) the
camera around its own vertical axis.
To shoot close-ups, slide the camera over
the subject, keeping it parallel to the subject
as you move it.
Shooting
Images can be shot in the following 2
sequences in Stitch Assist mode.
Left
Right
Left
Right
1
Turn the Shooting mode dial to
.
The LCD monitor will turn on.
2
Select the
shooting sequence
using the
or
button and press
the SET button.
The shooting sequence is
set.
50
Left to right horizontally
Right to left horizontally
You can also press the shutter button directly
to shoot without pressing the SET button.
3
Shoot the first image.
The exposure and white balance settings are
set and locked with the first image.
4
Compose and
shoot the second
image so that it
overlaps the first.
Minor discrepancies in
the overlapping portions
can be corrected when
the images are stitched
together.
Use the
or
button to check or retake the
recorded images.
5
Use the same procedures to shoot
the remaining images.
A maximum of 26 images can be recorded.
6
Press the SET button after the last
shot.
Sequence