List Of Messages - Canon PowerShot A510 User Manual

List of Messages

The following messages may appear on the LCD monitor.
For messages which may appear when a printer is connected, refer to the Direct Print User Guide.
Busy...
No memory card
Cannot record !
Memory card error
Memory card full
Card locked !
Naming error !
Change the batteries
No image
Image too large
Incompatible JPEG
format
Corrupted data
The camera is recording image data to the memory card.
The playback mode is running.
You turned on the power without a memory card installed.
You attempted to shoot with no memory card installed, or attempted to attach a sound
memo to a movie.
Memory card has experienced an anomaly.
Memory card is too full to accommodate more images or print settings.
The SD card (sold separately) is write-protected.
The image could not be created because there is an image with the same name as the
directory that the camera is attempting to create, or the highest possible file number has
already been reached. In the [Set up] menu, please set [File No. Reset] to [On]. After
you save all the images you wish to retain onto a computer, format the memory card
(p. 19). Please note that formatting will erase all the existing images and other data.
Battery charge is insufficient to operate the camera. Replace both batteries at the same
time with new AA-size alkaline batteries (p. 15) or fully recharged Canon NiMH
batteries.
No images recorded on memory card.
You attempted to play back an image larger than 4064 x 3048 pixels or with a large data
size.
You attempted to play back an incompatible JPEG image.
You attempted to play back an image with corrupted data.
121