Mercedes-Benz SLK-Class 2008 Owner's Manual page 41

Hide thumbs Also See for SLK-Class 2008:
Table of Contents

Advertisement

Safety
Occupant safety
Occupant safety
Seat belts, together with belt tensioners, belt
force limiters and airbags, are coordinated
restraint systems. They reduce the risk of
injury in defined accident situations and
thereby increase occupant safety. However,
seat belts and airbags generally do not pro-
tect against objects penetrating the vehicle
from the outside.
To ensure that the restraint systems can
deliver their full potential protection, you
should ensure that:
the seat and head restraint are adjusted
R
properly (
page 59)
Y
the seat belt has been fastened properly
R
(
page 69)
Y
the airbags can inflate properly if they are
R
deployed (
page 41)
Y
the steering wheel is adjusted properly
R
(
page 63)
Y
the restraint systems have not been modi-
R
fied
i
An airbag increases the protection of
vehicle occupants wearing a seat belt.
However, airbags are only an additional
restraint system which complements, but
38
does not replace, the seat belt. All vehicle
occupants must wear their seat belt cor-
rectly at all times, even if the vehicle is
equipped with airbags. This is because - on
the one hand - airbags are not deployed in
all types of accident, as in some situations
airbag deployment would not increase the
protection afforded to vehicle occupants,
provided they are wearing their seat belt
correctly. On the other hand, airbag deploy-
ment only provides increased protection if
the seat belt is worn correctly because:
the seat belt helps to keep the vehicle
R
occupant in the best position in relation
to the airbag
for example, in a head-on collision, the
R
seat belt can more adequately prevent
the occupant from being propelled
towards the force of the impact, and is
thus better suited to prevent injury
Therefore, in accident situations where an
airbag is deployed, it only provides protec-
tion in addition to the seat belt if the seat
belt is being worn correctly.
G Risk of injury
The restraint system may not work as inten-
ded if the following components have been
modified or work on these components has
not been performed correctly:
restraint system, consisting of the seat
R
belts and anchorages, belt tensioners,
belt force limiters, airbags
wiring
R
networked electronic systems
R
Airbags or belt tensioners could then fail,
e.g. in the event of an accident in which the
deceleration force would normally be high
enough to trigger the systems, or they
could be triggered unintentionally. Never
carry out any modifications on the restraint
systems. Never tamper with electronic
components and their software.
G Risk of accident and injury
Always have maintenance work carried out
at a qualified specialist workshop which
has the necessary specialist knowledge
and tools to carry out the work required.
Mercedes-Benz recommends that you use
a Mercedes-Benz Service Centre for this
purpose.

Advertisement

Table of Contents
loading

Table of Contents