Table of Contents
Advertisement
The engine oil temperature gauge flashes if
the engine oil temperature has not reached
80 †. Avoid driving at full engine output dur-
ing this time.
Displaying the on-board voltage
Press the
j
button repeatedly until the
X
on-board voltage appears.
Gear indicator
1
On-board voltage
2
RACETIMER
The RACETIMER allows time measurements
to be saved.
While you have the RACETIMER displayed,
you will not be able to adjust the volume using
the
æ
and
ç
buttons.
Press the
j
button repeatedly until the
X
RACETIMER appears.
Gear indicator
1
RACETIMER
2
Lap
3
You can start the RACETIMER when the
engine is running or if the key is in position
2 in the ignition lock.
To start: press the
æ
button to start the
X
RACETIMER.
To display the intermediate time: press
X
the
ç
button to show the intermediate
time.
The intermediate time is displayed for five
seconds.
To stop: press the
æ
button to stop the
X
RACETIMER.
The RACETIMER interrupts timing when you
stop the vehicle and turn the key to position
1 in the ignition lock. When you turn the key
to position 2 or 3 and then press the
button, timing is continued.
Storing the lap time and starting a new lap
It is possible to store a maximum of nine laps.
Press the
ç
button to show the inter-
X
mediate time during timing.
The intermediate time is displayed for five
seconds.
Press the
ç
button again within 5 sec-
X
onds.
The displayed intermediate time is stored
as a lap time.
Timing starts for a new lap. The new lap is
timed from when the intermediate time is
called up.
Gear indicator
1
RACETIMER
2
Fastest lap time (best lap)
3
Lap
4
æ
Controls
On-board computer
97
Advertisement
Table of Contents
