Table of Contents
Advertisement
Press the
è
or
·
button repeatedly
X
until either the original menu or the Mes-
sage memory menu appears.
If the Message memory menu does not
appear, there are no display messages.
If there are messages, the following mes-
sage may appear in the multi-function dis-
play, for example: 2 messages.
Press the
j
or
k
button to call up a
X
display message.
You can scroll through the display mes-
sages in sequence. The possible display
messages are explained in the "Practical
advice" section (
page 174).
Y
Settings menu
In the Settings menu, you can use the To
reset: Press reset button for 3 sec-
onds function to restore most settings to the
factory settings. There are also submenus in
which you can make individual settings for
your vehicle.
i
Menu overview: see (
page 94).
Y
Use the buttons on the multi-function steer-
ing wheel.
Resetting to factory settings
For safety reasons, not all functions are reset:
permanent Speedtronic can only be set in the
Vehicle submenu. The Headlamp mode
function in the Lighting submenu is only
reset if the vehicle is stationary.
Press
è
or
·
to select the Set-
X
tings menu.
Press and hold reset button Jon the left
X
of the instrument cluster for approximately
three seconds.
A prompt appears in the multi-function dis-
play asking you to press the reset button
again to confirm.
Press reset button
J
again.
X
The functions of most submenus are
restored to the factory settings.
or
If you want to retain the settings, do not
X
press reset
buttonJ
a second time.
You will see the Settings menu again after
approximately 5 seconds.
Press the
è
or
·
button to select a
X
different menu.
On-board computer
Submenus in the Settings menu
Press
è
or
·
to select the Set-
X
tings menu.
Press the
j
button to call up the selec-
X
tion of submenus.
A submenu appears. There are several sub-
menus.
Press the
æ
or
ç
button to select a
X
submenu.
The selected submenu is highlighted.
Press the
j
button to select a function
X
within a submenu.
Press the
æ
or
ç
button to change
X
the setting.
The changed setting is stored.
Press the
è
or
ÿ
button to select a
X
different display.
The following tables show the settings you
can make in the individual submenus. You will
Controls
Z
101
Advertisement
Table of Contents
