Table of Contents
Advertisement
Turn signal lamp (front)
R
Reversing lamp
R
Rear foglamp
R
Turn signal (rear)
R
Licence plate lighting
R
Observe the following points:
Use only the bulb types specified here.
R
To prevent a short-circuit, switch off the
R
lights before changing a bulb.
Only hold bulbs with a clean, lint-free cloth.
R
Do not work with wet or greasy fingers.
R
If the new bulb still does not light up, con-
R
sult a qualified specialist workshop, e.g. a
Mercedes-Benz Service Centre.
i
Have the headlamp setting checked reg-
ularly at a qualified specialist workshop,
e.g. a Mercedes-Benz Service Centre.
* optional
Changing the front bulbs
Halogen or bi-xenon* headlamps
Housing cover for dipped-beam headlamp
1
(halogen/bi-xenon headlamps)
Bulb holder for turn signal
2
Bulb holder for main-beam headlamp
3
Bulb holder for side/parking lamps
4
Practical advice
Changing the bulbs
Halogen headlamps
Bulb holder for dipped-beam headlamp
5
Replacing dipped-beam headlamps
(vehicles with halogen headlamps)
Switch off the lights.
X
Open the bonnet.
X
Turn housing cover
1
anti-clockwise and
X
remove it.
Turn bulb holder
5
anti-clockwise and
X
remove it.
Pull the bulb out of bulb holder 5.
X
Insert the new bulb into bulb holder 5.
X
Z
215
Advertisement
Table of Contents
