Emerson Rosemount 2051HT Quick Start Manual page 20

Hygienic pressure transmitterwith foundation fieldbus protoco

Hide thumbs Also See for Rosemount 2051HT:

Quick Start Guide

8. Review transmitter configuration and place in service

Note

If hardware or software write protection is not needed, step 10 can

be skipped.

9. Set switches and software write lock.

Note

The write lock switch can be left in the locked or unlocked position.

The simulate enable/disable switch may be in either position for

normal device operation.

Enable software write lock

Procedure

1. Navigate from the Overview screen.

2. Perform Write Lock Setup to enable software write lock.

a) To review the transmitter configuration, navigate using the

guided setup navigation sequences for "AI Block Unit Setup",

"Change Damping", and "Set up LCD Display".

b) Change any values as necessary.

c) Return to the Overview screen.

d) If Mode is "Not in Service", select the Change button, and

then select Return All to Service.

a) Check switches (see

a. Select Device Information.

b. Select the Security and Simulation tab.

Figure

3-4).

November 2019

Rosemount 2051HT

Table of Contents