Main Parts; Specifications - Stihl HTE 60 Instruction Manual

23 Main Parts

for any damage that may occur. Among other
things, this includes:
– Damage to the motor due to neglect or defi‐
cient maintenance (e.g. not cleaning cooling
air inlets).
– Damage due to incorrect electrical connection
(voltage, inadequately rated connecting
cords).
– Corrosion and other consequential damage
resulting from improper storage.
– Damage to the product resulting from the use
of poor quality replacement parts.
22.2 Parts Subject to Wear and Tear
Some parts of the power tool are subject to nor‐
mal wear and tear even during regular operation
in accordance with instructions and, depending
on the type and duration of use, have to be
replaced in good time. Among other things, this
includes:
– Saw chain, guide bar
– Chain sprocket
23 Main Parts
1
10
11
1 Handle Hose
2 Carrying Ring
3 Starting Lockout
4 Switch
5 Connecting Cord
0458-247-9921-C
2
3
4
5
8
6
7
9
12
13
16
6 Oilomatic Chain
7 Guide Bar
8 Tank Cap
9 Oil Tank
10 Drive Tube
11 Chain Scabbard
12 Chain Sprocket Cover
13 Hook
14 Chain Tensioner
15 Chain Sprocket
16 Strain Relief

24 Specifications

24.1 Motor
Voltage:
Rated current:
Frequency:
Power consumption:
Rated speed under load: 11,000 rpm
Fuse:
Insulation:
24.2 Chain Lubrication
Fully automatic, speed-controlled oil pump with
rotary piston
Oil tank capacity:
24.3 Weight
without cutting attachment
4.7 kg
24.4 Cutting Attachment
Actual cutting length may be less than the speci‐
fied length
24.4.1 Rollomatic E Mini guide bars
Cutting length:
Pitch:
Groove width:
24.4.2 1/4" P chain
Picco Micro 3 (71 PM3) Type 3670
Pitch:
Drive link gauge:
24.4.3 Chain Sprocket
8-tooth for 1/4" P
24.5 Noise and Vibration Data
For further details on compliance with Vibration
Directive 2002/44/EC visit www.stihl.com/vib.
English
230 - 240 V
7 A
50 Hz
1.45 kW
10 A
II, E
120 cc (0.12 l)
30 cm
1/4" P (6.35 mm)
1.1 mm
1/4" P (6.35 mm)
1.1 mm
45