Table Of Contents - Furuno GP-32 Operator's Manual

TABLE OF CONTENTS

FOREWORD ................................... v
SYSTEM CONFIGURATION.......... vi
WHAT IS WAAS?.......................... vii
EQUIPMENT LISTS ..................... viii
1. OPERATIONAL OVERVIEW...... 1
1.1 Controls ...................................... 1
1.2 Turning On and Off Power .......... 2
1.3 Adjusting Brilliance and Contrast 2
1.4 Display Modes ............................ 3
1.5 Menu Overview........................... 7
1.6 Simulation Display ...................... 8
2. PLOTTER DISPLAY OVERVIEW9
2.1 Choosing the Display Range....... 9
2.2 Shifting the Cursor ...................... 9
2.3 Shifting the Display ................... 10
2.4 Centering Own Ship's Position.. 10
2.5 Changing Track Plotting Interval,
Stopping Plotting....................... 10
2.6 Erasing Track.............................11
3. WAYPOINTS (MARKS) ............ 13
3.1 Entering Waypoints................... 13
3.2 Entering the MOB Mark ............ 15
3.3 Displaying Waypoint Name ....... 16
3.4 Operations on the Waypoint List 16
3.5 Erasing Waypoints .................... 17
3.6 Speed for Calculating Time-to-Go,
Estimated Time of Arrival .......... 18
4. ROUTES ................................... 19
4.1 Creating Routes........................ 19
4.2 Editing Routes .......................... 23
4.3 Erasing Routes ......................... 25
5. DESTINATION .......................... 27
5.1 Setting Destination by Cursor ... 27
5.2 Setting Destination by Waypoint 27
5.3 Setting Route as Destination..... 28
5.4 Setting User Waypoint as
Destination................................ 28
5.5 Canceling Destination ............... 28
6. ALARMS................................... 29
6.1 Arrival Alarm, Anchor Watch
Alarm.........................................29
6.2 XTE (Cross Track Error) Alarm..30
6.3 Speed Alarm..............................31
6.4 WAAS/DGPS Alarm ..................31
6.5 Time Alarm ................................31
6.6 Trip Alarm..................................32
6.7 Odometer Alarm ........................32
6.8 Buzzer Type Selection...............32
7. OTHER FUNCTIONS ............... 33
7.1 Calculating Range, Bearing,
TTG and ETA ............................33
7.2 WAAS Setup .............................34
7.3 DGPS setup ..............................35
7.4 Bearing Reference.....................37
7.5 Magnetic Variation .....................38
7.6 Geodetic Chart System .............38
7.7 Units of Measurement ...............38
7.8 Position Display Format.............39
7.9 Time Difference (using local time),
Time Format ..............................39
7.10 GPS Setup ................................40
7.11 User Display Setup....................41
7.12 Resetting Trip and Odometer
Distances ..................................42
7.13 Uploading, Downloading
Waypoint, Route Data................43
7.14 Language ..................................46
8. MAINTENANCE &
TROUBLESHOOTING ............. 47
8.1 Maintenance..............................47
8.2 Displaying the Message Board ..47
8.3 Replacing the Fuse....................48
8.4 Replacing the Battery ................48
8.5 Satellite Monitor Display ............49
8.6 Diagnostics................................49
8.7 Clearing Data ............................50
iii