Trip Alarm; Odometer Alarm; Buzzer Type Selection - Furuno GP-32 Operator's Manual

6. ALARMS

6.6 Trip Alarm

This alarm alerts you by aural and visual
alarms when your boat has traveled a
distance greater than the trip alarm distance.
1. Press the [MENU] key once or twice to
open the menu.
2. Choose ALARMS.
3. Press the [ENT] key.
4. Choose TRIP and then press the [ENT]
key.
5. Choose ON and then press the [ENT] key.
6. Press the [ENT] key. Enter distance
desired (001-999 nm) with the cursor pad.
7. Press the [ENT] key.
8. Press the [MENU] key twice to finish.
When the boat has traveled further than the
preset trip distance, the buzzer sounds and
the message TRIP ALARM! and the alarm
icon appear.

6.7 Odometer Alarm

This alarm alerts you by aural and visual
alarms when your boat has traveled the total
distance you set.
1. Press the [MENU] key once or twice to
open the menu.
2. Choose ALARMS.
3. Press the [ENT] key.
4. Choose ODOMETER and then press the
[ENT] key.
5. Choose ON and then press the [ENT] key.
6. Press the [ENT] key. Enter distance
desired (001-999 nm) with the cursor pad.
7. Press the [ENT] key.
8. Press the [MENU] key twice to finish.
When the boat has traveled further than the
preset trip distance, the buzzer sounds and
the message ODOMETER ALARM! and the
alarm icon appear.
32

6.8 Buzzer Type Selection

The buzzer sounds whenever an alarm
setting is violated. You can choose the type
of buzzer to use as follows:
1. Press the [MENU] key once or twice to
open the menu.
2. Choose ALARMS.
3. Press the [ENT] key.
4. Choose BUZZER and then press the
[ENT] key.
SHORT
LONG
CONSTANT
Buzzer sound options
5. Choose buzzer type desired and then
press the [ENT] key.
SHORT: Two short beeps
LONG: Three long beeps
CONSTANT: Continuous beeps
6. Press the [MENU] key twice to finish.