Table of Contents
Advertisement
Press SET to set [BSP] reference.
The display will now show you the text [%] toggling with text
[BSP] or whatever trim you have selected.
The speed variation is expressed in % from set value.
Press the SET every time you wish to set a new trim reference
value. There is an option to use an external trim button to set a
new trim reference. See more in the calibration.
Each sector represents 2%
5.6
More functions in a Nexus Network
By adding (or using) the Wind Data instrument in the Nexus
Network, more functions will be added if the corresponding
transducer is connected.
The Wind Data functions may be added or removed by the user.
The Wind Data instrument can be used in a small Network together with the Multi, Log
or analogue instrument, without a Server.
In order to make the installation easy when using both log and Wind transducer in a
small Network we recommend you to install with connection kit art.no. 21453. Only one
cable will carry the signals to the instrument, then there is one Network/power cable to
the Multi or Log instrument. (See 3.3).
When using the Wind Data in a bigger Network with more then 3 transducers, we
recommend you to use the FI-30 Server.
Only one cable will be used to connect all instruments. You will also have the NMEA
0183 input/output.
If you need to be able to read the depth information on more then one instrument, the
Server is the only choice.
Network bonus function:
If you are using the race timer on the Multi or Log instrument
you will have a graphical 60 second countdown timer "popping
up" on this instrument.
In this example there is 45 second to start.
21
Advertisement
Table of Contents
