C23 Unit For Temperature; C24 Temperature Offset; C30 Compass Settings; C31 True Or Magnetic Course - Furuno FI-303 Operator's Manual

Wind data

Table of Contents

6.2.3

C23 Unit for temperature

Select degree Celsius [C] or degree Fahrenheit [F].

6.2.4

By adding a positive or [-] negative value here, it will be added

as an offset before displayed as the temperature.

6.3

To return to normal PAGE, press SET when the text [rET] is

displayed.

6.3.1

This function is only used when the instrument is connected in

the Nexus Network. [MAG On] will display bearing, course and

Wind direction as magnetic. The LCD indication is (MAG).

Select [OFF] to display all as true.

6.3.2

Set the deviation direction first, i.e. [+E] (East) or [W] (West),

then enter the magnetic value in 1/10 of a degree.

6.3.3

Select heading Compass [Hdc] when the Compass transducer

is connected to the Nexus Network (recommended).

Select course over ground [COG] when a GPS navigator is

connected, but no Compass.

Select STA for static use at fixed installations, such as at the

yacht club, airfield, ferry berth and so on.

In static PAGE you may mount the transducer in the direction of North, or if not

possible, you may adjust the transducer electronically. See C54, 6.4.4.

Note! [COG] as reference will only operate properly when the boat is doing speed over

ground.

Table of Contents