Product Hardware Features - TRENDnet TPE-P521ES User Manual

TRENDnet User's Guide
Ports
One gigabit PoE+ input port, two gigabit PoE output ports, and two gigabit ports
provides a 10Gbps switching capacity.
PoE Power
Two gigabit PoE pass through ports with an 18W total PoE power budget.
Compact Design
With a compact and lightweight housing design this switch is well-suited for desktop
installations. Its fanless design is ideal for quiet environments that require silent
operation.
Network Management
A broad range of network configurations are supported by: 802.3ad link aggregation,
802.1Q VLAN, bandwidth controls, IGMP, loopback detection, port mirroring, STP, RSTP
and 802.1p (QoS).
Troubleshooting
Traffic statistics and a convenient cable diagnostic test aid in network troubleshooting.
Housing
Compact wall mountable metal housing.
LED Indicators
LED indicators convey port status.
© Copyright 2018 TRENDnet. All Rights Reserved.

Product Hardware Features

Gigabit PoE
Reset Button
out Ports

Reset Button – Press and hold the button 1~5 seconds and release to
reboot the device. Pressing the button more than 6 seconds will reset
the switch to factory defaults. The ports LEDs will display Amber and
then turn off to indicate that the reset was initiated.

Gigabit Ethernet PoE Out Ports (1-2) – Connect either network PoE or
non-PoE devices.

Gigabit Ethernet Ports (3-4) – Connect non-PoE network devices.

Gigabit Ethernet PoE+ in Ports (5) – Must be connected to a PoE or PoE+
power source in order to power this switch.
TPE-P521ES
Front View
Gigabit PoE/PoE+ in
Gigabit Ports
Port
Rear View
2