Port Priority; Set Port Priority - TRENDnet TPE-P521ES User Manual

TRENDnet User's Guide

Port Priority

Set Port Priority

QoS > Port Priority
The Port Priority values are assigned to an untagged frame at ingress for internal
processing in the switch. This procedure explains how to change the default mappings of
port priorities to the User Priority. This is set at the switch level. You cannot set this at
the per-port level. To change the port priority mappings, perform the following
procedure.
1. Log into your switch management page (see
on page 7).
2. Click on QoS and click on Port Priority.
3. For each port whose priority you want to change, select a priority in the User Priority
column. Click Apply to save the settings.
© Copyright 2018 TRENDnet. All Rights Reserved.
"Access your switch management page"
NOTE: The configured settings are only applied to the switch's temporary memory and
will be lost upon the next power-cycle. Please follow these next steps to save the
configurations to the switch's NV-RAM to ensure the settings will remain throughout
power-cycles and reboots:
1. From the menu on the left: click on Save, then click the blue button Save
Settings to Flash.
2. Click Continue to return to the Web Configuration of your switch.
TPE-P521ES
42