Camera; Monitor; Additional Camera Connection - Lorex SG5550 Instruction Manual

OPERATION

Camera

(1) Connect the power adapter to the camera power input and turn on
the camera by pressing Power. Ensure the camera is set to channel 1.

Monitor

(1) Connect the supplied power adaptor to the power input of the monitor
or the Docking Station. Turn on the monitor by switching Power
ON/OFF to ON. The LCD will display Channel 3 by default.
(2) Use the channel selector switch button to ensure the monitor is set to
the same channel as the camera to view the picture. Note: If you
experience reception problems (eg. poor picture), you may need to
select another channel on both the camera and monitor.
(3) Adjust the volume to the desired level. You may also mute the audio
option by reducing the Volume dial to the minimum level.
(4) Adjust the brightness level as required.
NOTE
Try to position both the Camera and Monitor as high off the ground as
possible for better picture reception.

ADDITIONAL CAMERA CONNECTION

This video security system allows you to view up to four different camera
locations. Additional cameras are sold separately, please refer to
www.lorexcctv.com for more information.
When connecting more than one camera to the monitor/camera system,
you will need to set each camera to a different channel (Channels 1-4).
CH 1
9