Lorex SG5550 Instruction Manual page 12

MONITOR INSTALLATION
Note: Connection of the Monitor to
the Docking Station is optional.
The benefits of the Docking
Station are: A/V Out and Battery
Charging.
If using the Docking Station, connect the supplied 6V DC 800 mA adapter
to the DC INPUT JACK at the rear of the Docking Station and plug it into
an electrical outlet.
Alternatively, you can bypass the Docking Station and plug the adapter
directly into the DC INPUT JACK on the side of the monitor.
BATTERY CASE & COMPARTMENT
Remove the battery case cover by unscrewing the bolt at the back of the
monitor. This system requires 4 "AA" size batteries (not included).
Your wireless monitor has AC or battery option. When using the AC option
with rechargeable batteries, your monitor will automatically switch
to back up battery feature during a power outage, providing you with
uninterrupted power to the monitor.
To recharge the batteries, simply place the monitor in the Docking Station
with the AC Adapter connected. The battery option also provides you the
flexibility to move the monitor from room to room. Battery life is
approximately 2 –3 hours. It takes 10~15 hours to fully recharge the
batteries. When the monitor's sound weakens or the picture becomes
unsteady, replace the batteries.
Battery Type Switch: In order for the
monitor to detect Rechargeable Batteries,
the switch inside the battery compartment
must be set at Rechargeable rather than
Alkaline.
Note: Do not set the selector switch to
Rechargeable if non-rechargeable
batteries are being used.
Warning: To prevent damage to the unit,
ensure that the batteries are aligned
properly and battery types are not mixed.
8
6V DC 800 mA
AC Adapter