Toro Z Master Professional 5000 Series Setup Instructions page 6

Charge the battery; refer to the Operator's Manual
for instructions.
10
Installing the Seat
International Machines Using
Gasoline Only
Parts needed for this procedure:
1 Seat
1
Seat plate (fixed seats only)
8 Flange nuts (3/8 inch)—fixed seats only
4 Spacers (3/8 inch)—fixed seats only
4 Flange nuts (3/8 inch)—tilting seats only
2 Long spacers (tilting, deluxe seats only)
4 Short spacers (tilting, deluxe seats only)
Installing the Seat on Models with
a Fixed Seat
1. Remove the hydraulic-unit shroud from the
machine.
Figure 9
g001084
1. Hydraulic-unit shroud
2. Remove the 4 nuts holding the seat plate to the
machine. Discard these nuts, they are used for
shipping only.
3. Secure the seat plate to the seat with 4 spacers
and 4 flange nuts (3/8 inch).
6
Figure 10
2. Bolts
Figure 11
g010175
g010182